I’ve decided to go with Windows XP for my dual-boot environment on the MacBook.  Partly due to familiarity, but mostly due to the lower resource requirement.

In setting up this new environment, I needed to decide how to cope with my Windows XP disc being an original, pre SP1 disc.  The solution: Slipstream.

Slipstreaming allows you to create a Windows XP CD that has updates like the most current Service Packs.  In this case, I’ll be adding Service Pack 3.

There are lots of guides on how to do the Slipstream process, including these two on HowToHeaven and Invisibill.  These are great step-by-step tutorials that show you everything involved in the process.  But they’re also very manual.

The tool I’ve chosen to go with is nLite.  This slick little application provides the ability to not only Service Pack your XP installation, but apply lots of other custom features as well.  Here are the steps I went through for my Slipstreaming adventure.  (There is also a step-by-step guide on the nLite Website)

Step 1: When running nLite is to show it where the Windows installation is located.  After that, you’ll need to specify a location for nLite to perform it’s magic.  I chose C:slipstream.

Step 2: The next phase is to select the options for your installation.  I’m a whole-hog kinda guy, so I elected to go with every option if for no other reason than to browse the options and screens.

Step 3: Pick your Service Pack.  Once you’ve selected a service pack and applied it, nLite will perform the Slipstream operation and integrate the service pack.

Step 4: Updates & Hotfixes.  The more that you can download and apply here, the fewer there will be to apply once the windows installation is completed.

Step 5: Select components to remove.  nLite gives you the opportunity to eliminate components from the final installation.  This can lighten not only the ISO, but also the final installation.  Beware removing too many options.  By eliminating support for hardware or drivers the usage of the installation will become more limited.  However, if you have a specific application in mind it can help to streamline the process.

Step 6: Unattended Install. The next screen provides the ability to streamline the installation for a smooth unattended install.  If you want to use this option, you’ll need your Windows XP CD key at this stage.

Step 7: Installer Options. This screen allows you to customize some of the behaviours of the installation process including boot-time messages and BIOS backup retention.  If you don’t understand an option, take the default.

Step 8: Tweaks. Wow.  This section has dozens upon dozens of options to tweak and adjust virtually every major setting in Windows.  And a whole bunch that aren’t so major.  Take your time with this and make sure to read the little captions for each option.  There are so many possibilities.

Step 9: Integrate all the changes.  nLite will begin to create the installation image, merging together all the changes you’ve selected.  This process will take quite a while.  On my machine it took about 10 minutes.

Step 10: Burn the ISO.  Set any last settings you want for the ISO, and click the Create ISO button to start writing the image.  Once the image is written, it can be installed to a VM (VMWare/VirtualServer) or burned to a disk for installation at a later time.